1-Fuels, Refractories, and Furnaces Lab:

Room No. : MC-20 (Ground Floor)

The Fuels, Refractories, and Furnaces Lab in the department of Metallurgical Engineering at BIT Sindri provides students the knowledge of practical and hands-on training on the phenomenon of solid, liquid, and gaseous fuels and fundamental ideas about refractories and metallurgical furnaces. This lab has the following equipment Flash point apparatus, Oven Electrically Heated, Gallenkamp bomb calorimeter static, Muffle furnace, Gas calorimeter, etc.

2-Metallurgical Thermodynamics and Kinetics Lab:

Room No. : MC-12 (Ground Floor)

Metallurgical Thermodynamics and Kinetics Lab in the department of Metallurgical Engineering at BIT Sindri provides the students with the knowledge of basic principles of thermodynamics and kinetics which is a must for the understanding of any metallurgical processes involving chemical reactions and physical changes at high temperatures. This lab has the following equipment such as pH – meter (G-Type), Conductivity meter, Polari meter, Barometer, Tube furnace, Tilting furnace, etc.

3-Metallurgical Analysis Lab

Room No.: MC17 (Ground Floor)

Metallurgical Analysis Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge on basic principles of sample preparation and chemical analysis of samples through different techniques. This lab has the following equipment such aa Bunsen burners, High Temp. furnace, Electrical heater, Regulate Hot plate, etc.

4- Mineral Engineering Lab:

Room No. : MC-26 (Ground Floor)

The Mineral Engineering Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training on various mineral processing with the following equipment as a Vibratory Sieve shaker, Primary Jaw Crusher, roll crusher, Ball mill, Wilfley Table, Froth Floatation Cell, magnetic separator etc.

5-Metallography Lab

Room No.: MC40(First Floor)

The Metallography Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training on various sample preparation for metallographic inspection of metal and alloys sample with the following equipment as Inverted Metallurgical microscope, Metallurgical microscope, Metallurgical Polishing Machine, Specimen mount press complete set, Image analyzer, etc.

6-Transport phenomena Lab

Room No.: 

The Transport Phenomena Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training on mass transfer and heat transfer with the following equipment as wetted wall column, Emissivity Apparatus, Parallel-Counter flow H.E Shell & Tube H.E, Thermal Conductivity of Liquids, Heat Transfer through Composite wall, etc.

7-Material Characterization Lab

Room No. : MC39 (First Floor)

The Material characterization Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for material characterization of metal and alloys sample with the following equipment as Metallurgical Polishing Machine, Specimen mount press complete Metallurgical microscope, Atomic absorption spectroscopy, etc.

8-Electro hydro & Corrosion Lab

Room No. : MC24 (Ground Floor)

The Corrosion Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for testing of corrosion rate of metal and alloys with the following equipments such as crucible and digital weighing machine for corrosion test by weight loss technique, Ammeter D.C. range, Retort stand, Induction furnace, etc.

9-Physics of Materials Lab

Room No.: MC39(First Floor)

The Physics of Materials Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training in stereographic projection, the angle between the crystallographic plane, and grain size measurement, etc with the following equipment such as Wulf net, Metallurgical Microscope, microstructural image for grain size measurement, etc.

10-Extractive Metallurgy-I Lab

Room No. : MC12 (Ground Floor)

The Extractive Metallurgy-I Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for the Roasting of sulfide ores, Calcination of limestone, drying of moist sand, and study of pelletizer with the following equipment such as crucible and digital weighing machine, muffle furnace, disc pelletizer, Induction furnace, etc.

11-Mechanical Testing Lab

Room No: MC14 (Ground Floor)

The Mechanical Testing Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for the mechanical behavior of materials with the following equipment as UTM, Impact Testing Machine, Brinell Hardness Testing Machine, Rockwell Hardness Testing Machine, Vickers Hardness Testing Machine, etc.

12-Extractive Metallurgy-II Lab

Room No.: MC27 (Ground Floor)

The Extractive Metallurgy-I Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for the extraction of metals and welding of metals and alloys with the following equipment such as Metric 200/230 amp transformer, Hungarian gas welding & Cutting set, Digital micro monometer, Chemical balance, etc.

13-Computational Engineering Lab

Room No. : MC46(First Floor)

The Computational Engineering Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for computer language and its utilization in metallurgical Engineering with the following software such as MATLAB, Python, Machine Learning, etc.

14-Foundry Lab

Room No.: MC27 (Ground Floor)

The Foundry Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training for melting, casting, and solidification of metals and alloys with the help of following equipment such as Induction furnace, molding sand, various types of patterns, Gating System, Runner, Riser, etc.

15-Nano-science and Technology Lab

Room No. : MC21 (Ground Floor)

The Nano-science and Technology Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands on training for nanopowder production of different metals and alloys, coating of metals and alloys with the help of following equipment such as Scanning Tunnel Microscope (STM), Physical Quantity Measurement system (PQMS), Low-Speed Diamond Cutter, Chemical Vapour Deposition (CVD), etc.

16-Heat Treatment Lab

Room No.: MC41(First Floor)

The Heat Treatment Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands-on training on different heat treatment processes of metals and alloys to alter the internal microstructure and its mechanical properties with the following equipment such as Muffle Furnace, Tubular Furnace, Metallurgical microscope, etc.

17-Met Workshop Lab

Room No.: MC28 (Ground Floor)

The Metallurgical Workshop Lab in the department of Metallurgical Engineering at BIT Sindri provides the students the knowledge of practical and hands on training for sample preparation for different mechanical testing like Tensile test, Izod Test, Charpy Test, Torsion Test, hardness Test etc. of different metals and alloys sample.