Faculty Profile
1. Name: Dr. Sumit Kumar Sharma
2. Department: Metallurgical Engineering
3. Email id: [email protected] , [email protected],
4. Office Address: MC-48, Department of Metallurgical Engineering, BIT Sindri, Sindri, Dhanbad, Jharkhand-828123
5. Qualification:
|
S. No. |
Course |
Specialization |
Institute |
|
1. |
PhD |
Metallurgical and Materials Engineering |
IIT Kharagpur |
|
2. |
M.Tech |
Metallurgical and Materials Engineering |
IIT Roorkee |
|
3. |
B.Tech |
Mechanical Engineering |
UPTU, Lucknow |
6. Area of Specialization: Welding, Material Processing (Friction Stir, Electron Beam and Laser), Corrosion, Wear
7. PhD (Guided): NIL
8. Subject Taught:
a. UG: 05
b. PG: 02
9. Professional Experience:
|
S. No. |
Position Held |
Name of Organization |
From |
To |
|
1. |
Assistant Professor |
BIT Sindri |
5th March 2018 |
Current |
|
2. |
Research Scholar |
IIT Kharagpur |
11th July 2013 |
4th March 2018 |
|
3. |
Assistant Professor |
Dr. B. R. Ambedkar N.I.T. Jalandhar, Punjab |
26th July 2011 |
14th June 2013 |
10. Publications:
a) International Journal:
1. Sumit K. Sharma, K. Biswas and J. Dutta Majumdar, Effect of Heat Input on Mechanical and Electrochemical Properties of Electron-Beam-Welded Inconel 718, Journal of Material Engineering and performance, 2020, doi.org/10.1007/s11665-020-04660-w.
2. Sumit K. Sharma, K. Biswas, A. K. Nath, I. Manna and J. Dutta Majumdar, Microstructural Change During Laser Welding of Inconel 718, OPTIK-International Journal of Light and Electron Optics, (2020), 165029, doi.org/10.1016/j.ijleo.2020.165029.
3. Sumit K. Sharma, K. Biswas, A. K. Nath, I. Manna and J. Dutta Majumdar, Microstructural Characterization of laser-surface melted Inconel 718, J Opt, (2020), doi.org/10.1007/s12596-020-00649-9.
4. Sumit K. Sharma, K. Biswas and J. Dutta Majumdar, Microstructural Characterization of Electron Beam Melted Inconel 718 Superalloy, Metal and Materials International, 2020, doi.org/10.1007/s12540-020-00884-6
5. Sumit K. Sharma, K. Biswas, A. K. Nath, I. Manna and J. Dutta Majumdar, Wear Behavior of Laser Surface Melted Inconel 718, Lasers in Engineering, (2020) (in press).
6. Soumyabrata Basak, Sumit K. Sharma, Mounarik Mondal, Kisor K. Sahu, Srikant Gollapudi, J. Dutta Majumdar, Sung-Tae Hong, Electron Beam Surface Treatment of 316 Austenitic Stainless Steel: Improvement in Hardness, Wear, and Corrosion Properties, Met. Mater. Int. (2020), doi.org/10.1007/s12540-020-00773-y.
7. Sumit K. Sharma, K. Biswas, and J. Dutta Majumdar, Wear Behavior of Electron Beam Surface Melted Inconel 718. Procedia Manufacturing 35 (2019) 866-873, doi.org/10.1016/j.promfg.2019.06.033
8. Sumit K. Sharma, Prashant Agarwal, and J. Dutta Majumdar, Studies on Electron Beam Welded Inconel 718 Similar Joints. Procedia Manufacturing 7 (2017) 654-659, doi.org/10.1016/j.promfg.2016.12.097
9. Soumyabrata Basak, Sumit K. Sharma, Kisor K. Sahu, Srikant Gollapudi, Jyotsna Dutta Majumdar, Surface modification of structural material for nuclear applications by electron beam melting: enhancement of microstructural and corrosion properties of Inconel 617, SN Applied Sciences (2019), doi.org/10.1007/s42452-019-0744-5.
10. Soumyabrata Basak, Kishor K. Sahu, Sumit K. Sharma, and J. Dutta Majumdar, Studies on Electron Beam Surface melting of AISI 316 Stainless Steel and AISI 347 Stainless Steel. Procedia Manufacturing 7 (2016) 647-653, doi.org/10.1016/j.promfg.2016.12.096.
11. Shivanna Pradeep, Sumit Kumar Sharma, Vivek Pancholi, Influence of friction stir processing parameters on anisotropic behavior property of 5086-o aluminum Alloy. Materials Science Forum Vols. 702-703 (2012) pp 348-351, doi.org/10.4028/www.scientific.net/MSF.702-703.348
12. S.Pradeep, Sumit Kumar Sharma, Vivek Pancholi, Microstructural and Mechanical Characterization of Friction Stir Processed 5086 Aluminum Alloy. Materials Science Forum Vols. 710(2012) pp 253-257, doi.org/10.4028/www.scientific.net/MSF.710.253
b) Presented in Conferences:
1. Sumit K. Sharma, K. Biswas, and J. Dutta Majumdar, Surface Characteristics of Laser Beam Surface Melting of Inconel 718 Superalloy, NMD-ATM 2018, Kolkata, 14-16th November 2018.
2. Sumit K. Sharma, Asish K. Nath, K. Biswas, J. Dutta Majumdar, Microstructure and Mechanical properties of Laser Beam Surface Melted Inconel 718, MRS Fall meeting 2017, Boston, Massachusetts, USA, 26th November to 1st December, 2017.
3. Sumit K. Sharma, K. Biswas, and J. Dutta Majumdar, Parameter Optimization for Electron Beam Surface Melting of Inconel 718, International Conference on Materials Engineering, June 2-4,
4. 2017, Indian Institute of Technology Kanpur.
5. Sumit K. Sharma, Asish K. Nath, K. Biswas, J. Dutta Majumdar, Surface Modification of Inconel 718 by Laser Surface Melting, the 4th International Conference on Advances in Materials & Materials Processing, ICAMMP –IV, 5-7th November, 2016, IIT Kharagpur.
6. Soumyabrata Basak, Kisor K. Sahu, Sumit K. Sharma and J. Dutta Majumdar, Studies on Electron Beam Surface Melting of Inconel 617, the 4th International Conference on Advances in Materials & Materials Processing, ICAMMP –IV, 5-7th November, 2016, IIT Kharagpur.
7. Sumit K. Sharma, K. Biswas, I. Manna, J. Dutta Majumdar, A.K. Jha and S.C. Sharma, Corrosion behavior of Inconel 718 after Electron beam surface processing, NIGIS "CORCON 2016" Sept. 18 – 21, 2016 * New Delhi.
8. Sumit Kumar Sharma,K. Biswas, J. Dutta Majumdar, Studies on Electron Beam surface Processing of Inconel 718. 3rd International conference on “Laser and Plasma Application in Materials Science (15-17 January 2015)”.
9. Sumit Kumar Sharma, Pradeep, S., Vivek Pancholi, Study of Defects in Friction Stir Processed Commercially Pure Aluminum Alloy. International Conference on Frontiers in Mechanical Engineering (20th to 22nd May 2010), NIT Karnataka, Surathakal.
11. Patent (Files or Granted): NA
12. Conferences/ Workshop/ Seminar organized
|
S. No. |
Title of Seminar/ Conferences/ Short Term Courses |
Role |
Date of Event |
Organizing Institute |
|
1. |
Understanding Metallurgy of Steel for its effective utilization |
As a Coordinator |
27-28th October 2018 |
BIT Sindri |
|
2. |
International Conference on Advances in Materials & Materials Processing, ICAMMP –IV, |
Symposium coordinator |
5-7th November, 2016 |
IIT Kharagpur |
|
3. |
Laser and Plasma Applications in Materials Science |
Secretary and Member of organizing committee |
15-17 Jan. 2015 |
IIT Kharagpur |
|
4. |
3rd International Conference on Production and Industrial Engineering (CPIE 2013) |
Member of organizing committee |
29-31st march 2013 |
Dr. B. R. Ambedkar NIT Jalandhar |
13. Symposium/ workshop/ Seminar/ Attended
a) TEQIP sponsored two weak course on “Digital transformation in teaching learning process” from 16th March to 30th March 2020.
b) Course on Entrepreneurship (Idea to Business Plan, Business Skills for Entrepreneurs, Startup to IPO) from 6th May 2020 to 24th June 2020, Organized by BIT Sindri in collaboration with Alumni Association of North America (BITSAANA).
14. Administrative Position Held
a) Faculty in-charge of Corrosion Lab.
b) Departmental TEQIP Coordinator
c) Departmental NAAC coordinator
d) Mentor for the first year undergraduate Students
15. Award/ Recognition Bestowed on Faculty (State/ National/ International).
a) Attain travel grants from IIT Kharagpur to attend MRS fall meeting 2017, Boston, Massachusetts, The USA from November 26th to December 1st 2017
b) Invited lecture on “Working of the internal combustion Engine and factors responsible for increase its efficiency” for a UG course in the department of Mechanical Engineering, Dr. B. R. Ambedkar National Institute of technology, Jalandhar, Punjab, India.
c) Achieved Score 428 in GATE 2012 in Mechanical Engineering.
d) Attain Score 417 in GATE 2008 in Mechanical Engineering.
e) Got MHRD scholarship during M. Tech from 2008 to 2010.
16. Members of Professional Bodies: -
a) Indian Institute of Metal (IIM Metallurgy and Materials-Membership # 57498)
b) Indian Laser Association (ILA-Membership # SM-290)
c) The Minerals, Metals & Materials Society-TMS (TMS#533437)
Copyright © 2017 B.I.T. Sindri, Dhanbad, Jharkhand, India